[Prev][Next][Index][Thread]
Re: Halo Blue?
Reply to JPST,
Reading that you are an installer, and before answering your question, I will
ask you the following if you will react to me as there are some statements (not
only) you produce to me that are mixing me up.
Question: When I must install a sign to a brickstone wall and I'am using a
drilling machine to make holes to fit the sign against the wall and the
indication plate of the drilling machine is telling me maximum current is 2.2
Amps and I'am drilling and drilling hard and even harder and the drilling
machine comes to be hot and even hotter and after an hour I put my nonbestos
gloves on becouse the drilling machine is becoming hotter and more hotter as
I'am drilling constantly big holes in the wall and the machine is not consuming
2.2 Amps from the mains but 3.2 amps from the main supply as I'am pushing
extremely hard to the machine and just before lunchtime one field of the machine
is burned out because of the higher Amps I'am pulling (sucking?) out from the
mains, do you cal that drilling machine an under- or overloaded electrical
device?
Hope to hear from you soon, meanwhile signing with his
best regards
dirk a. boonstra