Mail Thread Index
Neon-L Aug 95 to July 96 (Archive #1)
- (2) "Crackle Neon", Chris Biebel
- (0) Re: "Crackle Neon", Ted Pirsig
- (0) Re: "Crackle Neon", Kenny Greenberg
- (0) Re: "Crackle Neon", Jacob Fishman
- (0) "Diffusion" pumps, Tom Biebel
- (0) Re: "Diffusion" pumps, ja
- (0) Re: "Diffusion" pumps, Kenny Greenberg
- (1) Re: "Diffusion" pumps, Al Hooton
- (0) Re: 'Virgin' grounds, taine gilliam
- (0) 12kv elect. trans.?, Tom U.
- (0) RE: 12kv elect. trans.?, Steven N. Humleker
- (0) Re: 12kv elect. trans.?, Kenny
- (1) 2 color neon ??, chris morley
- (0) Re: 2 color neon ??, WallerNeon
- (1) Re: 2 color neon ??, Kenny Greenberg
- (0) 2 color neon ??, chris morley
- (0) Re: 2 color neon ??, IN2NEON
- (1) Re: 2 color neon ??, STPubs
- (0) Re: 2 color neon ??, Kenny Greenberg
- (0) Re: 704 in manometer, ja
- (1) acquiring start-up equipment, J.D. Schueler
- (1) Re: acquiring start-up equipment, Kenneth Greenberg
- (2) Re: air reg, Al Hooton
- (1) Re: air reg, Al Hooton
- (0) All subscribers, please read., ja
- (0) animation project from hell, Frank Varnell
- (0) Re: Anybody tried "Neonics" e..., EclectiKat
- (0) Re: Anybody tried "Neonics" e..., John Anderson
- (0) Re: Anybody tried "Neonics" e..., Kenny
- (0) Anybody tried "Neonics" electronic trans, John Anderson
- (0) Re: arc-through, Ted Pirsig
- (0) Audio Buzz prob., Tom Biebel
- (0) Backing pump for metal diffusion pump, Ted Pirsig
- (2) Bad Gas, WallerNeon
- (0) Re: Bad Gas -test requirements!, joe mercurio
- (0) Re: Bad Gas -test requirements!, arturo de carlo
- (0) Re: Bad Gas -test requirements!, Kenny
- (0) Re: Bending Machine, EclectiKat
- (0) Re: Bending Machine, DBoniface
- (0) Re: Bending Machine, JPSTacoma
- (0) Re: Bending Machine, Ron Anas
- (0) Re: Bending Machine, Al Hooton
- (0) Re: Bending Machine, EclectiKat
- (0) Re: Bending Machine, mvilela
- (0) Re: Bending Machine, Al Hooton
- (0) Re: big Diffusion pumps, EclectiKat
- (1) Re: big pumps, Neonmc
- (0) Re: Black Light, Planet9069
- (0) Re: Black Light, NeonDave
- (0) Re: RE: Black Light, NeonDave
- (0) Re: Black Light tubing..., NeonDave
- (1) blank on block out tubing, DBoniface
- (1) Re: blank on block out tubing, Kenny
- (1) Re: blank on block out tubing, EclectiKat
- (0) Re: blank on block out tubing, EclectiKat
- (0) Re: blank on block out tubing, NPOLSTON
- (0) re: Blazek book, Ted Pirsig
- (0) Re: Block out paint, Howard B. Cohen
- (0) Re: Block out paint--latex alternative, Neolite
- (0) Re: Block out paint--latex alternative, Kenny Greenberg
- (0) Re: block out tubing, DBoniface
- (0) Re: block out tubing, Garett Churchill
- (0) Re: block out tubing, EclectiKat
- (0) Re: block out tubing, DBoniface
- (0) Block-out tubing, Garett Churchill
- (0) Blockout paint MSDS, Ted Pirsig
- (0) Re: Blockout paint MSDS, EclectiKat
- (0) Re: Blockout paint MSDS, NPOLSTON
- (0) Re: blowers, ja
- (0) Re: blowers, Howard B. Cohen
- (1) Blowers, tesla
- (1) Re: Blowers, JD Schueler
- (0) Re: Blowers, tmjdorr
- (0) Re: Re: Blowers, tesla
- (0) Blowers, Garett Churchill
- (1) blowers, tmjdorr
- (0) blowers, tesla
- (0) Re: Re- Blowers, Don Pomplun
- (0) Re: blowers, Ron Anas
- (0) Re: blowers, IN2NEON
- (0) Blowhoses... Yech!, Tom Biebel
- (0) bombarder flashback, tmjdorr
- (0) bombarder light, EMF's, Ted Pirsig
- (0) bombarder rigging, Ted Pirsig
- (2) Re: bombarder sizes, John Anderson
- (0) Bombarder Sizes, tmjdorr
- (0) Re: bombarder sizes, Kenny Greenberg
- (0) Re: bombarder sizes, Bettina Barbier
- (0) Re: bombarder sizes, Bettina Barbier
- (0) Fwd: Bombarding, Neonmc
- (0) Bombarding Bore, Tom Biebel
- (1) Re: bombarding darkening, NeonThom
- (0) Re: Bombarding Flashback, Jacob Fishman
- (0) Re: Bombarding Flashback, Kenny Greenberg
- (0) Re: Bombarding Flashback Bombarding Flas, Frank Varnell
- (1) Re: Bombarding safely, Kenny Greenberg
- (0) Re: Bombarding safely, Mike R.
- (0) Re: Bombarding safely, John Anderson
- (1) bombarding time, Ted Pirsig
- (0) Re: bomber rigging, ja
- (1) Bombing advice helped!, Tom U.
- (0) Bombing again., Tom Biebel
- (1) Bombing, Neon Products 'trodes, ja
- (0) re: Broken Neon, Chris Biebel
- (0) re: re: broken ruby red, Ted Pirsig
- (1) Broken ruby red (late reply), NeonDave
- (0) building transformer, Ron Anas
- (1) Re: building transformer, Kenny
- (0) Re: building transformer, Kenny
- (1) Can't I just give the stuff away?!?!?, Cessna6T
- (0) Re: Caught in A Vacuum; patterns;, Ted Pirsig
- (0) Re: Caught in A Vacuum; patterns;, Kenny Greenberg
- (0) certfication, DBoniface
- (1) certification, DBoniface
- (0) Re: Cold weather gas & transformers, Neonmc
- (0) re: Cold weather gas & transformers, Chris Biebel
- (0) color dyes/paints, DBoniface
- (0) Re: color dyes/paints, Jay B. Little
- (0) Re: color dyes/paints, Kenny Greenberg
- (0) Color-changing transformers, Kathee Laffranchi
- (0) Re: Color-changing transformers, Kenny
- (0) Re: Color-changing transformers, joe mercurio
- (0) Re: colored 6500 white/Morgan?, DBoniface
- (0) Re: colored 6500 white/Morgan?, Neonmc
- (0) Re: colored 6500 white/Morgan?, John Anderson
- (0) Re: colored 6500 white/Morgan?, DBoniface
- (0) Computer pattern-making, ja
- (0) Re: Computer pattern-making, Steve Humleker
- (1) confusion diffusion pumps?, DBoniface
- (0) Confusion Pumps, Tom Biebel
- (0) Re: Copy of: Re: small tube f..., EclectiKat
- (0) Copy of: Re: small tube filling pressure, arturo de carlo
- (1) Copy of: Re: small tube filling pressure, arturo de carlo
- (0) Re: Copy of: Spa Blowers?, Frank Varnell
- (0) Re: Copy of: Spa Blowers?, DBoniface
- (0) Corel draw, Kenny Greenberg
- (0) Re: Corel Draw, computer patterns, ja
- (0) Re: A couple questions..., NeonDave
- (0) Crackle grinder, Tom Biebel
- (1) Re: Crackle tubes, neonthom
- (0) Re: Crackle tubes, Howard Cohen
- (0) Re: Crackle tubes, Mike R.
- (0) Re: Re: Crackle tubes, tesla
- (0) Re: Re: Crackle tubes, NeonDave
- (0) Re: Crackle tubes, neonthom
- (0) Re: Crackle tubes, Mike R.
- (0) Re: Re: Crackle tubes, tesla
- (0) dark stains, DBoniface
- (0) Dif pumps, etc., ja
- (0) Diffusion confusion (was Re: JEOL Vacuum, Al Hooton
- (0) Re: Diffusion confusion (was Re: JEOL Va, psmith
- (0) Re: Diffusion confusion (was Re: JEOL Va, John Anderson
- (0) Diffusion Oil, Mark Herman
- (0) Re:Re: Diffusion Oil, Neonmc
- (0) Re:Re: Diffusion Oil, Ted Pirsig
- (0) early experiences, NeonDave
- (1) electronic transformers, mvilela
- (1) Re: electronic transformers, John Anderson
- (0) Re: electronic transformers, EclectiKat
- (0) Re: electronic transformers, Kenny
- (0) Re: electronic transformers, MatthewsS
- (0) Re: electronic transformers, Kenny
- (0) Re: Enaba transformers, Ted Pirsig
- (0) Re: Enaba transformers/ keep good record, JPSTacoma
- (0) Re: Enaba transformers/ keep good record, Kenny
- (0) Re: Enaba transformers/ keep good record, Kenny
- (0) End Point Drawing, Tom Biebel
- (0) Enough Lurking!, Garett Churchill
- (0) Eric Moore, learning about neon, Neonmc
- (0) Excited to join the list..., NeonThom
- (1) Eyeware for neon work, ja
- (0) Re: Eyeware for neon work, DBoniface
- (0) Re: Eyeware for neon work, kenny
- (0) Eyewear for neon, Tom Biebel
- (0) Re: Eyewear for neon, Planet9069
- (1) Eyewear for neon, Tom Biebel
- (0) Flashback, NeonDave
- (0) flashback.........thank you, jim marshall
- (0) Re: flashback.........thank you, NeonDave
- (0) Re: flashback.........thank you, Kenny Greenberg
- (0) Re: flashback.........thank you, Kenny Greenberg
- (1) Flashbacks?, Tom Unger
- (0) Flushing Warranty Service, Edward DeZuzio
- (0) fwd mssg from Ted Pirsig, ja
- (0) Gauge wars, Bettina Barbier
- (0) Re: Gauge wars, DBoniface
- (0) Re: Gauge wars, Planet9069
- (1) gauges, Neonmc
- (1) Re: gauges, Ted Pirsig
- (1) Gauges, Neonmc
- (0) Re: gauges, Neonmc
- (0) Re: gauges, Mike R.
- (0) Re: gauges, Kenny Greenberg
- (0) Re: Gauges, Kenny Greenberg
- (0) Re: gauges, IN2NEON
- (1) Getting started, Jim Futrell
- (0) Re: Getting started, Kenneth Greenberg
- (0) Re: Getting started, Jim Futrell
- (0) Re: Getting started, David Cooley
- (0) Re: Getting started, A. Abid
- (0) GFI Protection, Tom Biebel
- (0) Re: Glass benders needed!, Neolite
- (0) Glassblowers' Safety Issues, sandie
- (1) Glassbower's glasses info, Tom Biebel
- (0) Re: Glassbower's glasses info, John Anderson
- (1) Re: Glassbower's glasses info, Kenny Greenberg
- (0) Re: Glassbower's glasses info, Al Hooton
- (0) Re: good neon literature ? ?, Tom U.
- (0) Re: good neon literature ? ?, Al Hooton
- (0) Grounding Schemes, Neoman
- (0) Re: Grounding Schemes, Eddie Kramer
- (1) Re: Grounding Schemes, Kenny Greenberg
- (0) grounding schemes revisited, tmjdorr
- (0) Re: Halo blue- phosphors physics, EclectiKat
- (0) Halo Blue?, Tom U.
- (0) Re: Halo Blue?, arturo de carlo
- (0) Re: Halo Blue?, DBoniface
- (0) Re: Halo Blue?, John Anderson
- (0) Re: Halo Blue?, Jed Schleisner
- (0) Re: Halo Blue?, Chris Biebel
- (0) Re: Halo Blue?, EclectiKat
- (0) Re: Halo Blue?, arturo de carlo
- (0) Re: Halo Blue?, EclectiKat
- (0) Re: Halo Blue?, EclectiKat
- (1) Re: Halo Blue?, EclectiKat
- (0) Re: Halo Blue?, arturo de carlo
- (0) Re: Halo Blue?, NeonDave
- (0) Re: Halo Blue?, JPSTacoma
- (0) Re: Halo Blue?, EclectiKat
- (0) Re: Halo Blue?, EclectiKat
- (0) Re: Halo Blue?, Kenny
- (0) Re: Halo Blue?, Kenny
- (0) Re: Halo Blue?, EclectiKat
- (0) Re: Halo Blue?, EclectiKat
- (0) Re: Halo Blue?, arturo de carlo
- (0) Re: Halo Blue?, arturo de carlo
- (0) Hello, Paul M. Javier
- (0) Re: Hello, Al Hooton
- (0) Re: Hello and xformers, ja
- (0) Hello!, Tim and Lori Reed
- (0) Re: Help, Neonmc
- (0) Re: Help, Jacob Fishman
- (0) Help with water-based blockout paints, NPOLSTON
- (0) Re: Help with water-based blockout paint, John Anderson
- (0) Help with water-based blockout paints, mvilela
- (0) Re: Help with water-based blockout paint, GADI6366
- (1) Re: Help with water-based blockout paint, NPOLSTON
- (0) Re: Help with water-based blockout paint, Roger Spott
- (0) RE: Help with water-based blockout paint, Steven N. Humleker
- (0) RE: Help with water-based blockout paint, JD Schueler
- (0) Re: Help with water-based blockout paint, NPOLSTON
- (0) Re: Help with water-based blockout paint, Al Hooton
- (0) Hi every One, Tom Woodley
- (0) high-voltage limiter on bombarder, etc, Ted Pirsig
- (2) Hot Glass Q's, JD Schueler
- (0) Re: Hot Glass Q's, Kenny Greenberg
- (0) Re: Hot Glass Q's, DBoniface
- (0) Re: Hot Glass Q's, JD Schueler
- (0) Re: Hot Glass Q's, John Anderson
- (0) Re: Hot Glass Q's, Neonmc
- (0) Re: Hot Glass Q's, NeonDave
- (0) Re: How much should I charge this guy?, Howard Cohen
- (1) Re: How much should I charge this guy?, John Anderson
- (0) Re: How much should I charge this guy?, Kenny Greenberg
- (0) Re: How much should I charge this guy?, WallerNeon
- (0) Re: How much should I charge this guy?, NeonLady
- (1) Re: How much should I charge this guy?, Ted Pirsig
- (0) howlin' ribbon burner, Ted Pirsig
- (0) Hydrogen, NeonDave
- (0) Hydrogen Outgassing, EclectiKat
- (0) Re: Hydrogen Outgassing, d eric johnson
- (0) Re: Hydrogen Outgassing, arturo de carlo
- (0) Re: Hydrogen Outgassing, EclectiKat
- (0) I saved my intro for some reason, so her, Frank Varnell
- (0) Re: I'll take a gauge or two, Bettina Barbier
- (0) Re: inductive heaters, Neonmc
- (0) Re: inductive heaters, Garett Churchill
- (0) Re: inductive heaters, Neonmc
- (0) Re: inductive heaters, Al Hooton
- (0) Re: inductive heaters, Neonmc
- (0) Re: inductive heaters, arturo de carlo
- (0) Re: inductive heaters, Al Hooton
- (0) Re: inductive heaters, Morgan Crook
- (0) Re: inductive heaters, Al Hooton
- (0) Re: inductive heaters, neonthom
- (0) Re: inductive heaters, Morgan Crook
- (0) Re: inductive heaters, EclectiKat
- (0) Re: Intro, Mike R.
- (0) Intro, WallerNeon
- (0) intro, Islndglass
- (0) Introduction, Ralph Flowers
- (0) Re: Introduction, John Rude
- (0) Introduction, Duane McClurg
- (0) Introduction, jnovotny
- (0) introduction, jknoble
- (0) Introduction, Jed Schleisner
- (0) introduction, RobertRut
- (0) Introduction, Eric Colby - x22055
- (0) Introduction, Jed Schleisner
- (0) introduction, NeonSigns
- (0) Introduction, DS
- (0) Introduction, Ed
- (0) Is it possible?, Howard Cohen
- (1) Re: Is it possible?, Ted Pirsig
- (0) Re: Is it possible?, NeonDave
- (0) Re: Is it possible?, Kenny Greenberg
- (0) Re: Jelly Beans, neonthom
- (0) Jelly beans, Chris Biebel
- (1) Re: Jelly Beans ????, Kenny
- (1) Re: Jelly Beans ????, John Tymoski
- (0) Re: Jelly Beans ????, Kenny
- (0) Re: Jelly Beans ????, Kenny
- (1) Re: Jelly Beans and more!, tesla
- (1) Re: Jelly Beans and more!, Kenny
- (0) Re: Jelly Beans and more!, Kenny
- (0) Jim's bending lessons, Tom Biebel
- (1) Re: kiln building, tesla
- (1) Latex blockout, Neonmc
- (0) Re: Latex-based block out, ja
- (0) Re: Latex-based block out, Cessna6T
- (0) Re: Latex-based block out/a cultural thi, DBoniface
- (0) Re: layout questions, Al Hooton
- (0) Re: layout questions, Cessna6T
- (0) Re: layout questions, Jacob Fishman
- (0) Re: layout questions, Howard B. Cohen
- (0) Re: layout questions, NeonDave
- (0) Lead free cont'd, Tom Biebel
- (0) re: Lead Free Glass, Chris Biebel
- (1) Lead free glass gets test, Howard B. Cohen
- (0) Living to tell about it., Ted Pirsig
- (0) Re: Looking for Hydrogen Torch, John Anderson
- (0) MA meter & Patterns, Jacob Fishman
- (0) Mainifold and "flushing", Tom Biebel
- (0) Majordomo results, listserv
- (0) Re: Manifold and Pumping System, WallerNeon
- (0) manifold cleaning; repumping merc tubes, Ted Pirsig
- (0) manifolds, DBoniface
- (0) Re: manifolds, Cessna6T
- (0) Merc exposure, jnovotny
- (1) Merc Tube Repair & Oven, Tom Biebel
- (0) Merc. and such, Tom Biebel
- (1) Merc. Repair Issue, Tom Biebel
- (0) Re: Merc. Repair Issue, Kenny Greenberg
- (0) Re: Merc. Repair Issue, NeonDave
- (2) Re: mercury, ja
- (2) mercury amounts & repairs, neonthom
- (0) Re: mercury amounts & repairs, Neonmc
- (0) mercury amounts & repairs, Chris Biebel
- (0) Re: mercury amounts & repairs, jnovotny
- (0) Re: mercury amounts & repairs, neonthom
- (0) Re: mercury amounts & repairs, Chris Biebel
- (1) Re: mercury amounts & repairs, Mike R.
- (1) Re: mercury amounts & repairs, Kenny Greenberg
- (0) Re: mercury amounts & repairs, Mike R.
- (2) Re: mercury amounts & repairs, Kenny Greenberg
- (0) Re: mercury amounts & repairs, John Anderson
- (0) Re: Mercury clean up, MatthewsS
- (0) Re: Mercury clean up, EclectiKat
- (0) Re: Mercury clean up, Tom Woodley
- (1) mercury injectors, neonthom
- (0) Re: mercury injectors, WallerNeon
- (0) Re: mercury injectors, EclectiKat
- (0) Re: mercury injectors, Mike R.
- (0) Re: mercury injectors, MatthewsS
- (0) Mercury migration w/electronic trans., Howard Cohen
- (0) Re: mercury poisoning, Ted Pirsig
- (0) Re: mercury poisoning, EclectiKat
- (0) Re: mercury repairs/old age, DBoniface
- (0) Re: Mercury, dif. pump oil, etc, John Anderson
- (0) metal diffusion pump, DBoniface
- (1) Re: metal diffusion pumps, Ted Pirsig
- (0) metal vs. glass diff pumps, Ted Pirsig
- (0) Re: metal vs. glass diff pumps, WallerNeon
- (0) Mica for bombing, Tom Biebel
- (0) Mid point confusion, Tom Biebel
- (0) Re: Mid point confusion, Kenny Greenberg
- (0) Mid point ground, Jay B. Little
- (0) Mid point ground return wires, Neonmc
- (0) Re: Mid point ground return wires, NeonDave
- (0) Re: Mid point ground return wires, Kenny Greenberg
- (0) Re: Mid point ground return wires, Jeff Foster
- (0) Re: Mid point ground return wires, Kenny Greenberg
- (0) Mid-point Ground, Tom Biebel
- (0) Re: Mid-point Ground, Kenny Greenberg
- (0) Re: Mid-point Ground, Roger D. Smith
- (0) mid-point grounding, tmjdorr
- (0) Midpoint grounding, Ted Pirsig
- (0) Re: milliamp meter, correction, Howard B. Cohen
- (0) Re: milliamp meter, correction, jim marshall
- (0) Re: Misc., Kenny Greenberg
- (0) Re: Misc., IN2NEON
- (0) Misc. Answers/Questions, Tom Biebel
- (0) Misc. Disc., Tom Biebel
- (0) Misc. Install Stuff, Tom Biebel
- (0) Misc. ketchup, Tom Biebel
- (0) Misc. Neon Stuff, Tom Biebel
- (1) Re: Misc. Neon Stuff, Kenny Greenberg
- (0) Misc. Neon Stuff, Tom Biebel
- (0) Misc. Replies, Tom Biebel
- (0) more air reg, JD Schueler
- (0) Re: more air reg, Al Hooton
- (0) Re: Re: more air reg, JD Schueler
- (0) More diff pump discussion, Neonmc
- (0) more gas, Neonmc
- (0) Re: More mid-point ground stuff, ja
- (0) More on flashback, NeonDave
- (0) Re: More on flashback, DBoniface
- (0) Re: More on flashback, NeonDave
- (0) MPG not MSG, Tom Biebel
- (0) My first bending experience!, Al Hooton
- (0) Natural gas, NeonDave
- (0) Re: Natural gas, Kenny Greenberg
- (0) RE: Natural Gas Flush,Clean Glass, Edward DeZuzio
- (0) RE: The Neon Mailing List and Introducti, Schmidt, Mark C.
- (1) Neon Plant - Economics, Mike R.
- (1) Re: Neon Plant - Economics, Mike R.
- (0) Re: Neon Plant - Economics, John Anderson
- (0) Re: Neon Plant - Economics, DBoniface
- (1) Neon Pricing, Cessna6T
- (0) RE: Neon Pricing, Edward DeZuzio
- (0) re: neon pricing, etc, Ted Pirsig
- (0) Re: re: neon pricing, etc, Planet9069
- (0) Neon Products 'trodes, Ted Pirsig
- (1) re: neon schools, Ted Pirsig
- (1) neon standards, Neonmc
- (0) Re: neon standards, Al Hooton
- (1) Re: neon standards, Kenny
- (0) Neon trouble, jknoble
- (0) Re: Neon trouble, aloha
- (0) Re: Neon trouble, NEOBLU
- (0) Re: Neon trouble, neonthom
- (0) Re: Neon trouble, chris morley
- (0) Neon videos reviewed, Ted Pirsig
- (0) Re: Neon Wanna-Be, Howard B. Cohen
- (0) Re: Neon Wanna-Be, IN2NEON
- (0) Re: Neon Wanna-Be, Frank Varnell
- (0) Re: NEON WIZARD, WallerNeon
- (0) Re: Neon Wizard fwd from Jim Marshall, Steve Humleker
- (1) Neon Wizard Software, Tariq Bucheeri
- (0) Re: Neon Wizard Software, JPSTacoma
- (0) Re: Neon Wizard, computerized pattern ma, John Anderson
- (0) Re: Neon, Holland, Germany, etc., arturo de carlo
- (0) New Hires, Tom Biebel
- (0) New lead free glass, Tom Biebel
- (0) new shop continued, J.D. Schueler
- (1) New Shop Questions, Tom Biebel
- (1) new shop setup, etc, Ted Pirsig
- (0) New Subscriber, joe mercurio
- (0) New Subscriber/ Business Perspective, JPSTacoma
- (0) Re: New user, ja
- (0) Re: No mail manifolds, NeonDave
- (0) No Subject, Ted Pirsig
- (0) No Subject, marcus
- (0) Old fashioned vacuum gauge, Tom Biebel
- (0) Re: Open Mouth- Insert Blowhose, ja
- (0) Re: Open Mouth- Insert Blowhose, Ted Pirsig
- (0) Outside air source, Tom Biebel
- (0) Re: Ovens or no ovens, Neonmc
- (0) Re: Ovens or no ovens, EclectiKat
- (1) Ovens., Al Hooton
- (1) Re: Ovens., EclectiKat
- (0) Re: Ovens., Kenny Greenberg
- (0) Re: Ovens., tmjdorr
- (0) Re: Ovens., Al Hooton
- (0) Re: Ovens., Neonmc
- (0) Re: Ovens., Mike R.
- (1) Re: Ovens., Neonmc
- (1) Re: Ovens., EclectiKat
- (0) Re: Ovens., EclectiKat
- (0) Re: Ovens., EclectiKat
- (0) Re: Ovens., John Anderson
- (0) Re: Ovens., Neonmc
- (0) Re: Ovens., Tom Biebel
- (0) Re: Ovens., arturo de carlo
- (0) Re: Ovens., Al Hooton
- (0) Re: Ovens., Al Hooton
- (0) Re: Ovens., EclectiKat
- (0) Over-pricing?, Ron Anas
- (0) Re: Over-pricing?, EclectiKat
- (0) Re: oxy, Ted Pirsig
- (0) paint supplier, Ted Pirsig
- (0) Re: Parallax "Stamp", Kenny Greenberg
- (0) Patterns-Production Idea, Edward DeZuzio
- (0) re: Paul Davis's articles, Ted Pirsig
- (0) RE: Pay for Broken Glass?, Edward DeZuzio
- (0) Perception of Gauges, Tom Biebel
- (0) Re: Perception of Gauges, Kenny Greenberg
- (0) Re: Phosphers, neonthom
- (0) Re: phosphor, EclectiKat
- (0) Re: phosphor, aloha
- (0) Re: phosphor, Kenny Greenberg
- (0) Re: phosphor, Neonmc
- (1) Re: phosphor, EclectiKat
- (1) Re: phosphors, John Anderson
- (0) Re: phosphors, EclectiKat
- (0) Re: phosphors, arturo de carlo
- (0) Re: phosphors, arturo de carlo
- (0) Re: phosphors, Kenny
- (0) Re: phosphors, John Anderson
- (0) Re: the physics of a neon sign, John Anderson
- (0) Re: the physics of a neon sign, EclectiKat
- (0) Re: the physics of a neon sign, Ted Pirsig
- (0) Re: the physics of a neon sign, EclectiKat
- (0) Re: the physics of a neon sign, d eric johnson
- (0) Re: the physics of a neon sign, John Anderson
- (0) plain vanilla GTO; even more on midpoint, Ted Pirsig
- (0) Re: plex edge smoothing, Mike R.
- (0) Polariscope, sandie
- (0) Re: Polarizing Filters, Neonmc
- (0) Re: Pressure adjustments for ..., EclectiKat
- (0) Re: Pressure adjustments for ..., John Anderson
- (0) Re: Pressure adjustments for ..., Tom U.
- (0) Re: Pressure adjustments for smaller tub, Tom Biebel
- (0) Re: Pressure adjustments for smaller tub, EclectiKat
- (0) Pressure adjustments for smaller tubes, Tom Biebel
- (1) Re: Pressure adjustments for smaller tub, Neonmc
- (0) Re: Pressure adjustments for smaller tub, Kenny
- (0) Re: Pressure adjustments for smaller tub, JPSTacoma
- (0) Re: Pressure adjustments for smaller tub, John Anderson
- (0) Re: Pressure adjustments for smaller tub, neonthom
- (0) Re: Pressure adjustments for smaller tub, Kenny
- (0) Re: Prices, NeonLady
- (0) Re: Prices, Kenny Greenberg
- (0) re: prices, diff pumps, Ted Pirsig
- (0) Pricing Program, Kenny Greenberg
- (0) Re: Pricing Program, Eddie Kramer
- (0) Re: Pricing Program, Eddie Kramer
- (0) Pricing software, NeonLady
- (1) Re: pricing that neon stuff, John Anderson
- (1) Re: pricing that neon stuff, WallerNeon
- (0) Re: pricing that neon stuff, WallerNeon
- (0) Re: pricing that neon stuff, NeonLady
- (0) Re: A quick note, Howard B. Cohen
- (0) Re: A quick note, Howard B. Cohen
- (1) Radio interference on new install., Ted Pirsig
- (0) rare gas usage, Ted Pirsig
- (0) re 2 color neon, Frank Varnell
- (0) re hot glass Q's, Frank Varnell
- (0) Re; diffusion pumps, Ted Pirsig
- (0) Re: Re; diffusion pumps, WallerNeon
- (0) Re: Re; diffusion pumps, WallerNeon
- (0) Re: Re; diffusion pumps, John Anderson
- (0) Re: Re; diffusion pumps, Neonmc
- (0) Re: Re; diffusion pumps, WallerNeon
- (0) Re: Re; diffusion pumps, Mike R.
- (0) Re: Re; diffusion pumps, WallerNeon
- (0) Re: Re; diffusion pumps, Neonmc
- (0) RE: Re; diffusion pumps, Steve Humleker
- (0) Re: Re; diffusion pumps, Kenny Greenberg
- (0) Re:Re: Re; diffusion pumps, Neonmc
- (0) Reaching Out, JPSTacoma
- (0) Re: Reaching Out, Ron Anas
- (0) Re: Reaching Out, Kenny Greenberg
- (0) Re: Reaching Out, Kenny Greenberg
- (0) Re: Reaching Out, EclectiKat
- (0) Re: Reaching Out, Frank Varnell
- (1) Re: Reaching Out, EclectiKat
- (0) Real Life Story, NeonDave
- (0) Real world stuff, Tom Biebel
- (3) red 8 mm tubes, mvilela
- (0) Re: red 8 mm /underfilling/overfilling??, DBoniface
- (0) Re: red 8 mm tube pressure, Neonmc
- (0) Re: red 8 mm tube pressure, EclectiKat
- (1) Re: red 8 mm tube pressure, John Anderson
- (0) Re: red 8 mm tube pressure:XE..., EclectiKat
- (0) Re: red 8 mm tube pressure:XENON, Krypto, arturo de carlo
- (0) Re: red 8 mm tube pressure:XENON, Krypto, Kenny
- (0) Re: red 8 mm tube pressure:XENON, Krypto, tesla
- (0) Re: red 8 mm tube pressure:XENON, Krypto, IN2NEON
- (0) Re: red 8 mm tubes, Neonmc
- (0) Re: red 8 mm tubes, EclectiKat
- (0) Re: red 8 mm tubes, mvilela
- (1) Re: red 8 mm tubes, Neonmc
- (0) The Red goes on, WallerNeon
- (0) Re: The Red goes on, Kenny Greenberg
- (0) red green neon, tmjdorr
- (0) Re: ref: the physics of a neo..., EclectiKat
- (1) Re: ref: the physics of a neo..., Bubblyhome
- (0) Re: ref: the physics of a neo..., d eric johnson
- (0) Re: ref: the physics of a neo..., arturo de carlo
- (0) Re: ref: the physics of a neo..., arturo de carlo
- (0) Re: ref: the physics of a neo..., JPSTacoma
- (0) ref: the physics of a neon sign, VTSign
- (1) Re: ref: the physics of a neon sign, John Anderson
- (0) Re: ref: the physics of a neon sign, neonthom
- (0) Re: ref: the physics of a neon sign, John Anderson
- (0) Reg. Trademarks, Ron Anas
- (0) Re: Reg. Trademarks, John Anderson
- (0) Re: Reg. Trademarks, EclectiKat
- (0) Re: Reg. Trademarks, Kenny
- (1) Re: RE: Reg. Trademarks to co..., EclectiKat
- (0) RE: Reg. Trademarks to copyright, Steven N. Humleker
- (0) RE: Reg. Trademarks to copyright, John Anderson
- (0) RFI Heaters, Garett Churchill
- (0) RFI Heaters?, Garett Churchill
- (0) ribbon burner, Frank Varnell
- (0) Re: ribbon burner port, Ted Pirsig
- (1) Re: Re: ribbon burner port; oxy, Ted Pirsig
- (1) Ruby from Technolux, Tom Biebel
- (2) Ruby Red, busted glass, ja
- (0) Re: Ruby Red, busted glass, Kenneth Greenberg
- (0) Re: Ruby Red, busted glass, Kenneth Greenberg
- (0) Safety concerns, Tom Biebel
- (0) Safety Glasses, Tom U.
- (0) Re: Safety Glasses, Tom U.
- (0) Safety Stuff, Chris Biebel
- (0) Safety Stuff, Chris Biebel
- (1) Same old, Tom Biebel
- (0) schools, Frank Varnell
- (0) Re: Scientific Systems & Tech..., EclectiKat
- (0) Re: Scientific Systems & Tech2000, Tariq Bucheeri
- (0) Re: Scientific Systems & Tech2000, Al Hooton
- (0) Re: Scientific Systems & Tech2000, jnovotny
- (0) Re: Service Contracts, Kenny Greenberg
- (0) Re: Service Contracts, WallerNeon
- (0) RE: Service Contracts, Steve Humleker
- (0) shipping glass, Ted Pirsig
- (0) Re: single electrode induction coils, Jacob Fishman
- (0) Re: single electrode induction coils, Neonmc
- (0) Re: skin effect, EclectiKat
- (0) Re: skin effect, Kenny Greenberg
- (0) Re: skin effect, Kenny Greenberg
- (0) Re: skin effect, EclectiKat
- (1) Re: skin effect, arturo de carlo
- (0) Re: small (& large) tube filling pressur, neonthom
- (0) Re: small (& large) tube filling pressur, arturo de carlo
- (0) Re: small tube filling pressures, Neonmc
- (0) Re: small tube filling pressures, Kenny
- (0) Re: small tube filling pressures, EclectiKat
- (0) Re: small tube filling pressures, Tom U.
- (0) Re: small tube filling pressures, EclectiKat
- (0) small tube filling pressures, psmith
- (0) Re: small tube filling pressures, NeonDave
- (0) Re: small tube filling pressures, EclectiKat
- (0) Re: small tube filling pressures, EclectiKat
- (0) Re: small tube filling pressures, arturo de carlo
- (0) Re: small tube filling pressures, arturo de carlo
- (0) Re: small tube filling pressures, arturo de carlo
- (0) Re: small tube filling pressures, EclectiKat
- (0) Re: small tube filling pressures, EclectiKat
- (0) Re: small tube filling pressures, arturo de carlo
- (1) So, what do YOU do in this case.., Ted Pirsig
- (0) Re: So, what do YOU do in this case.., Kenneth Greenberg
- (0) Re: So, what do YOU do in this case.., IN2NEON
- (1) Solid State Control of Neon Lights...., Jim S. Thompson
- (0) Re: Solid State Control of Neon Lights.., Kenneth Greenberg
- (1) Re: Solid State Control of Neon Lights.., Kenneth Greenberg
- (1) Re: Solid State Control of Neon Lights.., Kenneth Greenberg
- (1) Re: Solid State Control of Neon Lights.., A E Ulmann Jr
- (1) Re: Solid State Control of Neon Lights.., Kenneth Greenberg
- (0) Re: Solid State Control of Neon Lights.., Kenneth Greenberg
- (0) solid state transformers, Ted Pirsig
- (1) Re: solid state transformers, Kenneth Greenberg
- (0) Re: solid state transformers, Henry Schwartz 40-279W
- (0) Re: solid state transformers, Kenneth Greenberg
- (0) Solid State Transformers, Tom Biebel
- (0) solid-state questions, tesla
- (0) Re: solid-state stuff, etc., EclectiKat
- (0) Re: solid-state stuff, etc.Re: solid-sta, NeonDave
- (0) Some more info on eye protection, ja
- (0) Re: Sources In Los Angeles, Jacob Fishman
- (0) Spa Blowers?, Tom U.
- (0) standards, Neonmc
- (0) Re: Standards for the Neon Industry, WallerNeon
- (0) Re: Standards for the Neon Industry, arturo de carlo
- (0) Stupid E-mail Drawings, Tom Biebel
- (0) Stupid Midpoint Grounding, Kenny Greenberg
- (0) Re: Sulphur source, mercury clean-up, John Anderson
- (0) Sulphur source?, Bettina Barbier
- (0) Re: Sulphur source?, NeonDave
- (0) TC gauge, NeonDave
- (0) Re: Tech2000, tmjdorr
- (0) Tecnolux Lead Free, NeonDave
- (1) Tecnolux Lead Free Glass, Tom Biebel
- (0) Tecnolux Lead Free is High Octane, Kenny Greenberg
- (0) Temp Crayons, Tom Biebel
- (1) Temperature Indicator Crayons, sandie
- (0) Re: Temperature Indicator Crayons, Cessna6T
- (0) Re: Temperature Indicator Crayons, John Anderson
- (0) Re: temperature indicators (sunday times, Frank Varnell
- (0) Re: temperature indicators (Templaq), Mike R.
- (0) Tempilaq, Tom Biebel
- (0) Templaq, DBoniface
- (0) Thermal glass problems, Tom Biebel
- (0) Re: Thermal glass problems, Neonmc
- (0) Re: Thermal glass problems, John Anderson
- (0) Re: Thermal glass problems, Kenny Greenberg
- (0) Tips on optimizing induction heaters, EclectiKat
- (0) TRANSFORMER APPLICATION QUESTION, Howard Cohen
- (0) Transformer CGI program, Kenny Greenberg
- (0) Re: Transformer CGI program, Kenny Greenberg
- (0) Transformer failure mode, d eric johnson
- (0) Transformer loading, d eric johnson
- (0) Re: Transformer loading, Ron Anas
- (0) Re: Transformer loading, arturo de carlo
- (0) Re: Transformer loading, neonthom
- (0) Re: Transformer loading, Thrive-Link Marketing
- (0) Re: Transformer loading, EclectiKat
- (1) Transformer loading, d eric johnson
- (0) Re: Transformer loading, Kenny
- (0) Re: Transformer loading, DBoniface
- (0) Re: Transformer loading, EclectiKat
- (0) Re: Transformer loading/Allanson Trans, DBoniface
- (0) transformers, Howard Cohen
- (0) Transfromer Loading, jnovotny
- (0) Re: tuning adjustable power supplies, Kenny Greenberg
- (0) Under-car Neon, Howard Cohen
- (1) RE: Under-car Neon, Steven N. Humleker
- (0) Under-car Neon, Tom Biebel
- (0) Re: Under-car Neon, Ron Anas
- (0) Re: units turning red, Ted Pirsig
- (0) Re: units turning red, WallerNeon
- (0) Re: units turning red, Kenny Greenberg
- (0) Re: units turning red, WallerNeon
- (0) Re: units turning red, Kenny Greenberg
- (0) Update/hot glass info, JD Schueler
- (0) use of a MA meter, Howard B. Cohen
- (1) Re: use of a MA meter, Kenny Greenberg
- (0) Re: Vacuum Pumps & Diffusion Pumps, Roger D. Smith
- (0) Re: Vacuum Pumps & Diffusion Pumps, WallerNeon
- (0) Re: Vacuum Pumps & Diffusion Pumps, DBoniface
- (0) Re: Vacuum Pumps & Diffusion Pumps, WallerNeon
- (0) Re: Vacuum Pumps & Diffusion Pumps, Ted Pirsig
- (0) Re: Victory Neon "chokes", Neolite
- (0) Re: Victory Neon, Diffusion pumps, Howard B. Cohen
- (1) Warranties?, Planet9069
- (0) Re: Was: cheapie ... Now: business uncer, Bettina Barbier
- (0) Water Based Block-out (some more), ja
- (0) Re: Water Based Block-out (some more), Kenny Greenberg
- (0) Re: Water Based Block-out (some more), Neolite
- (0) Re: water-based blockout paint, Ted Pirsig
- (0) water-based blockout paints, NPOLSTON
- (0) Re: water-based blockout paints, EclectiKat
- (0) Re: whatever floats your secondary, NeonDave
- (0) Re: whatever floats your secondary, John Anderson
- (0) Re: whatever floats your secondary, Neonmc
- (0) Which is correct?, WallerNeon
- (0) workin' at the maul, Ted Pirsig
- (0) Re:XENON, Krypton, Neonmc
- (0) Xenon,Krypton, tesla
- (0) Yet more: diffusion pumps, Ted Pirsig
- (0) Re: Yet more: diffusion pumps, WallerNeon
- (0) Re: Yet more: diffusion pumps, Mike R.
- (0) Re: Yet more: diffusion pumps, John Anderson
- (0) Re: Yet more: diffusion pumps, Mike R.
Mail converted by MHonArc 1.2.2